A_nb_8_03_nmulti_15_30_45

SAFETY DATA SHEET
Date of issue: 02.06.2003
Date to update : 24.04.2009
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

1.1. Identification of the preparation:
ADHESIVES: NAUTIC MULTI 15, NAUTIC MULTI 30,
NAUTIC MULTI 15W, NAUTIC MULTI 30W, NAUTIC MULTI 40,
NAUTIC MULTI 45W

1.2. Use of the preparation:
Adhesives NAUTIC MULTI are two-component products. Very good for
joining and filling polyurethane foam, PCV, polyester or epoxy laminated elements in the shipbuilding industry. Products are available in basic version and W - version with indicator of colour’s change.
1.3.Company/undertaking identification:
NOVOL Sp. z o.o. Tel:
2. HAZARDS IDENTIFICATION
HEALTH HAZARDS:
Harmful product. Harmful by inhalation. Irritating to eyes and skin.
DANGEROUS PROPERTIES:
Flammable liquid; avoid contact with strong oxidants. 3. COMPOSITION / INFORMATION ON INGREDIENTS
EEC No.
Classification of Marking of the Composition 4. FIRST AID MEASURES
GENERAL INFORMATION:

INHALATION:
Administer Dexamethason aerosol (Auxiloson, Pulmicort) for inhalation. Ensure calm, quiet surroundings, fresh air, and seek medical advice. Take off soiled clothes. Wash off with plenty of lukewarm water (at least 15 minutes).Consult a doctor in the event of skin reaction. Hold the eyes open and rinse immediately with plenty of lukewarm water (at least 15 minutes). Contact with ophthalmologist.
ALIMENTARY TRACT:
Do not provoke vomiting (risk of choking). Rinse mouth with lukewarm water. Give 1-2 glasses of lukewarm water. Medical help is required. 5. FIRE-FIGHTING MEASURES
FIRE EXTINGUISHING
SUBSTANCES:
Powder, foam resistant to alcohols , carbon dioxide, watermist.
SPECIAL HAZARDS:
Under the influence of high temperature or in contact with strong oxidants, acids, basis, metal’s salts, copper and copper-alloy could take place polymerization of styrene. Polymerization is strongly exothermic reaction. Fire may cause the generation of carbon monoxide and other toxic gases.
PROTECTIVE EQUIPMENT:
Firemen have to wear self-contained breathing apparatus and protective clothing.
OTHER INFORMATION:
Cool adjacent tanks by spraying water from a safe distance. 6. ACCIDENTAL RELEASE MEASURES
PERSONAL PROTECTION:
Eliminate sources of ignition. Ensure sufficient ventilation in this room. Avoid direct contact with the released substance. Avoid contact with skin and eyes. Put on
PROTECTION OF THE ENVIRONMENT: Prevent to get through to the sewage system, to the surface water,
underground water, to the soil. In case of a major spillage the affected area should be
ACTION IN CASE OF SPILLAGE: Seal the container; damaged containers should be placed in emergency containers.
Besprinkle spillage, use e.g. mica, wood flour, sand. Remove the substance mechanically and put to emergency containers. For further disposal measures: see chapter 13.
SAFETY DATA SHEET
ADHESIVES: NAUTIC MULTI 15, NAUTIC MULTI 30, NAUTIC MULTI 15W, NAUTIC MULTI 30W, NAUTIC MULTI
45, NAUTIC MULTI 45W
Date of issue: 02.06.2003
Date to update : 24.04.2009
7. HANDLING AND STORAGE

HANDLING RULES:
Keep away from heat and sources of fire. Do not smoke. Do not inhale vapours. Avoid contact with skin and eyes. Take precautionary measures against electrostatic loading. Use only in well ventilated place. STORAGE:
Keep in sealed containers in cool, well ventilated place. Storage in the vicinity of a large quantity of organic peroxides or strong oxidants is prohibited. USE OF THE PREPARATION:
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION

LIMIT VALUES: for styrene CAS 100-42-5 according to:
• Adopted National Exposure Standards for Atmospheric Contaminants in the Occupational Environment TWA 100 mg/m3, 430 mg/m3, STEL 250ppm, 1080 mg/m3
RESPIRATORY TRACT PROTECTION:
Gas mask with “A” type absorbing canister. PROTECTION OF HANDS:
Protective gloves suitable for handling solvents (nitrile rubber, EYES PROTECTION:
SKIN PROTECTION:
Suitable protective clothing (antistatic, impregnated clothing) WORKPLACE:
Topical stays and exhausting ventilation. 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
sweet, penetrating odour (a typical smell of styrene) 10. STABILITY AND REACTIVITY
STABILITY:
The product remains stable under normal conditions. AVOID THE CONTACT OF
THE MATERIAL WITH:
Strong oxidants, acids, basis, high temperature. DANGEROUS
Carbon monoxide and other toxic gasses are generated as a result of DECOMPOSITION
PRODUCTS:
11. TOXICOLOGICAL INFORMATION
Toxicological studies at the preparation are not available.
TOXICITY(for styrene):

IRRITATING EFFECT:
Skin: irritating to skin and mucous membranes. Eyes: irritating effect.

SYMPTOMS OF POISONING:
Headache and vertigo, fatigue, decreased muscle power, sleepiness and, in exceptional instances, loss of consciousness. If swallowed, the substance may cause irritation of the alimentary tract, nausea, vomiting, and diarrhoea. Vapour may cause depression of nervous system. 12. ECOLOGICAL INFORMATION (for styrene)
Ecological studies at the preparation are not available. Number in catalogue includes substance danger to water : 187
Water hazard class : 2 LC50 Fish 4-10 mg/l/96h The product is very poorly soluble in water. Keep away from the sewage system, surface water, underground water, and soil.
SAFETY DATA SHEET
ADHESIVES: NAUTIC MULTI 15, NAUTIC MULTI 30, NAUTIC MULTI 15W, NAUTIC MULTI 30W, NAUTIC MULTI
45, NAUTIC MULTI 45W
Date of issue: 02.06.2003
Date to update : 24.04.2009
13. DISPOSAL CONSIDERATIONS
RECOMMENDATION:
Product must be disposed of by special means in accordance with local regulations.
REMAINS OF PRODUCT:
Remains of product in the tin should be carefully remove and harden using code of waste: 08 01 11
suitable hardener. Harden product is not harmfully substance and could be treat like plastics wastes (in accordance with the regulations). ATTENTION:
Remains should be harden in small portions far from flammable substances. Much amount of heat is emitting in the time of reaction!
CLEAN TIN:
Tin carefully clean is not harmful waste. code of waste: 15 01 04
TIN PARTLY EMPTY:
14. TRANSPORT INFORMATION
GENERAL INFORMATION:
Do not transport with materials class 1 (with the exception of materials class 1.4S) and with some of materials class 4.1 and 5.2. Avoid direct contact with materials class 5.1 and 5.2 in the time of transport. Do not use naked flame and do not smoke. ADR/RID:
UN 1866 RESIN SOLUTIONS, flammable, 3, III IMDG- Code:
RESIN SOLUTIONS, flammable, class 3, UN 1866, PG III ICAO/IATA:
15. REGULATORY INFORMATION
Safety data sheet in accordance with Directives:
67/548/EWG(2006/121/WE)
91/155/EWG (2001/58/WE)
1999/45/EC (2006/8/WE)
2006/1907/WE REACH
Other regulations: ADR (2007-2009) , IMDG Code 2006 Edition
CONTAINS:

HAZARD SYMBOL(S)

RISK-PHRASES:
SAFETY-PHRASES:
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S46 If swallowed, seek medical advice immediately and show this 16. OTHER INFORMATION
Full text of the R-Phrases from section 2 and 3:
R10Flammable.
R20Harmful by inhalation.
R36/38Irritating to eyes and skin.
Information contained herein is based on our current knowledge. This document does not constitute a warranty for product
characteristics.
Issued by: NOVOL Sp. z o.o.
Information: Laboratory Research and Development; tel. +48 61 810 99 09

Source: http://www.novol.de/att/1/karty_charakterystyk/a_NB_8_03_NMULTI_15_30_45.pdf