esschem co

M A T E R I A L S A F E T Y D A T A S H E E T
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
CHEMICAL NAME:
Manufacturer's Name : EZ Flow Nail Systems Address : 13720 Rosecrans Ave City, State, Zip : Santa Fe Springs, CA 90670 Business Telephone : 562-229-0337 Emergency Telephone : 800-535-5053 PREPARATION/UPDATE DATE: SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
FOR POLYMER:
ITEM CHEMICAL NAME
CAS NUMBER:
TLV-STEL
PEL CEILING
Recommendation

FOR DECOMPOSITION PRODUCTS:
ITEM CHEMICAL NAME
CAS NUMBER:
TLV-STEL
PEL CEILING
Recommendation

EMERGENCY OVERVIEW:
May irritate eyes, skin and respiratory tract. OSHA classifies this material as Particulates, Not Otherwise Classified. no matter how generated. Keep dust out of eyes. no matter how generated. May cause dryness. May be irritated by gross overexposure, no matter how generated. Prolonged and/or repeated skin contact may cause irritation, defatting, dermatitis and sensitization. cause irritation of nose, throat and lungs. For Decomposition Products: Methyl Methacrylate: Headaches, nausea, staggering gait, confusion, May cause eye corrosion and permanent injury. May cause changes in liver and kidney function or damage. Repeated and prolonged over exposure may cause permanent damage. with discomfort, tearing, or blurring of vision. Inhalation may cause irritation of the respiratory tract with coughing, of nonspecific discomfort, such as nausea, headache and or weakness. Effects in humans include skin irritation with discomfort or allergic skin rashes. Ingestion may cause anesthetic effects such as dizziness, headache, confusion, incoordination, and loss of consciousness May include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting. Administered lethal oral doses include weakness, labored and irregular respiration, drop in arterial blood pressure and coma. SECTION 3 - HAZARDS IDENTIFICATION CONTINUED CARCINOGENICITY:
Peroxide as not classifiable as to carcinogenicity to humans. None of the other components of this material are listed by IARC, NTP, OSHA, or ACGIH as carcinogens.
PRIMARY ROUTES OF ENTRY:

EMERGENCY AND FIRST AID PROCEDURES:
Remove to fresh air. Get medical help if discomfort persists. Flush with water for 15 minutes, including under eyelids. Get Wash with soap and water. Get medical help if discomfort Rinse mouth out with water. Call doctor if amount was large. Treat symptoms after thorough decontamination.
FLASH POINT:
FLAMMABLE LIMIT, AIR VOL% LOWER:
AUTOIGNITION TEMPERATURE:
EXTINGUISHER METHOD:
FIRE AND EXPLOSION HAZARDS:
Polymer dust is combustible. The explosive limits of the polymer particles suspended in air are approximately those of coal dust. SPECIAL FIRE FIGHTING PROCEDURES:
Avoid extinguishing methods which may generate dust clouds. Water stream can disperse dust into air, producing a fire hazard and possible explosion hazard if exposed to ignition source. EXPLOSION HAZARD:
Firefighters should wear self-contained breathing apparatus. SENSITIVE TO MECHANICAL IMPACT:
For Polymer: No. For Benzoyl Peroxide Component: Yes SENSITIVE TO STATIC DISCHARGE:
For Polymer: No. For Benzoyl Peroxide Component: Yes
ACCIDENTAL RELEASE:
airborne particulates at a minimum when cleaning up spills.
PRECAUTIONS FOR HANDLING:
Use in well ventilated areas. Wear gloves when handling
PRECAUTIONS FOR STORAGE:
Store in cool dry place. Keep container closed to prevent SECTION 8 - EXPOSURE CONTROL/PERSONAL PROTECTION
VENTILATION:
processing equipment, including buffers, sanders, grinders and polishers.
RESPIRATORY PROTECTION:

EYE PROTECTION:
Safety glasses or chemical splash goggles.
PROTECTIVE GLOVES:
Impervious, nitrile, if hot plastic is handled.
OTHER PROTECTIVE EQUIPMENT:
Provide eyewash, safety shower and impervious clothing are recommended. High temperature processing equipment should be well ventilated.
INDUSTRIAL HYGIENE PRACTICES:
Wash face and hands thoroughly with soap and water after use and before eating, drinking, smoking or applying cosmetics. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:
ODOR THRESHOLD:
BOILING POINT:
FREEZING POINT:
VISCOSITY:
SPECIFIC GRAVITY (H2O=1):
VAPOR PRESSURE:
PERCENT VOLATILE W/W%:
VAPOR DENSITY (AIR=1):
EVAPORATION RATE (BuAc =1):
SOLUBILITY IN WATER:
COEFFICIENT OF WATER/OIL DISTRIBUTION:

CONDITIONS TO AVOID:

INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: Methacrylate Monomer and Oxides of Carbon when burned.
HAZARDOUS POLYMERIZATION:

STABILITY:

TARGET ORGANS:
For Polymer;
For Decomposition Products: Methyl Methacrylate: MUTAGENICITY DATA:
For Polymer:
For Decomposition Products: Methyl Methacrylate:
REPRODUCTIVE TOXICITY DATA:
For Polymer:
SECTION 11- TOXICOLOGICAL PROPERTIES CONTINUED
TUMOROGENIC DATA:
For Polymer:

TOXICITY DATA:
For Polymer:
For Decomposition Products: Methyl Methacrylate: Approximate one-third of subjects developed mild redness at the site of application. Twenty percent showed sensitivity when tested 10 days later.
AQUATIC TOXICITY:
For Polymer:
For Decomposition Products: Methyl Methacrylate:
ECOLOGICAL TOXICITY:
For Polymer:

WASTE DISPOSAL METHOD:
Dispose in a landfill or incinerate according to
DISPOSAL OF EMPTY CONTAINERS:
Reuse of empty drums or containers is not recommended. Employees should be advised of the potential hazards, due to residual material, associated with empty containers. It is our policy to discourage the reuse of empty containers and to dispose of all empty containers properly, in accordance with Federal, State and Local regulations.
DOT/UN SHIPPING NAME:
DOT/UN CLASS:
NA/UN NUMBER:
PACKING GROUP:
NAERG:
LABEL:
NMFC ITEM #:
SCHEDULE B:
IMDG CLASS:
IMDG PG:
CERLA RQ:

TSCA: FOR USE IN FDA REGULATED PRODUCTS ONLY
CANADIAN WHMIS: This product has been classified in accordance with the hazardous criteria of the CPR and
the MSDS contains all the information required by the CPR.

HAZARDOUS MATERIAL IDENTIFICATION SYSTEM (HMIS) RATING:
Gloves and Safety Glasses or Chemical Splash Goggles.
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) HAZARD IDENTIFICATION RATING:

ABBREVIATIONS:

NA
OSHA Occupational Safety and Health Administration ACGIH American Conference of Governmental Industrial Hygienist IARC International Agency for Research for Cancer SSECTION 16 - OTHER INFORMATION CONTINUED Reviewed By: _____________________________ Reviewed By: _____________________________ THIS MATERIAL SAFETY DATA SHEET IS PREPARED IN COMPLIANCE WITH FEDERAL REGULATIONS (29 CFR 1910.1200), THE COMMONWEALTH OF PENNSYLVANIA REGULATIONS (TITLE 34. CHAPTERS 301-323) AND CANADIAN WHMIS REGULATIONS, ANY APPLICABLE STATE AND LOCAL REGULATIONS SHOULD BE CONSULTED. THE ABOVE INFORMATION MAY BE BASED IN PART ON INFORMATION PROVIDED BY COMPONENT SUPPLIERS AND IS BELIEVED TO BE CORRECT AS OF THE DATE HEREOF. HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY USE, OR ANY OTHER WARRANTY IS EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OF THESE DATA, THE RESULTS TO BE OBTAINED FROM THE USE OF THE MATERIAL, OR THE HAZARDS CONNECTED WITH SUCH USE. SINCE THE INFORMATION CONTAINED HEREIN MAY BE APPLIED UNDER CONDITIONS BEYOND OUR CONTROL AND WITH WHICH WE MAY BE UNFAMILIAR, AND SINCE DATA MADE AVAILABLE SUBSEQUENT TO THE DATE HEREOF MAY SUGGEST MODIFICATION OF THE INFORMATION, WE ASSUME NO RESPONSIBILITY FOR THE RESULT OF ITS USE. THIS INFORMATION AND MATERIAL IS FURNISHED ON THE CONDITION THAT THE PERSON RECEIVING IT SHALL MAKE HIS/HER OWN DETERMINATION AS TO THE SUITABILITY OF THE MATERIAL FOR HIS/HER PARTICULAR PURPOSE AND ON THE CONDITION THAT HE/SHE ASSUME THE RISK OF HIS/HER USE THEREOF.

Source: http://www.nationalsalonsupplies.com.au/upload/products/CLEAR%20POWDER.pdf