Resene.com.au

This SDS adheres to the standards and regulatory requirements of
Australia and may not meet the regulatory requirements
in other countries.
-- SAFETY DATA SHEET -- Ref. 000006711/N/AUS
Page 1 of 4
DuPont Performance Coatings Print date 2001-12-28
Revision date: 1999-12-16
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Chemical nature of the preparation: 761R , 762R , 763R POLYESTER HARDENER
Supplier: Emergency telephone number:
DuPont Australia Ltd ACN 000 716 469 Transport Tel. 02 9963 1301
Medical Tel. 1800 674 415
168 Walker Street
North Sydney NSW 2060
Tel. 02 9923 6111
DuPont (New Zealand) Ltd
98 Kerrs Road
Wiri, Manukau City
AUCKLAND, NEW ZEALAND
Tel. (09) 268 5500
2. COMPOSITION/INFORMATION ON INGREDIENTS:
Chemical nature of the preparation: mixture of benzoyl peroxide and plasticiser
Hazardous components: CAS-No Weight % Classification
benzoyl peroxide 94-36-0 30-60 Xi; R36-43
diisobutyl phthalate 84-69-5 10-30 -
R36 - Irritating to eyes.
R43 - May cause sensitization by skin contact.
3. HAZARDS IDENTIFICATION
HAZARDOUS ACCORDING TO CRITERIA OF WORKSAFE AUSTRALIA.
SUSDP: S5
Most important hazards: May cause fire.
Irritating to eyes.
May cause sensitization by skin contact.
Specific hazards: None known
4. FIRST AID MEASURES:
Inhalation: Move to fresh air. Oxygen or artificial respiration if needed. Consult a physician after
significant exposure.
Skin contact: Take off all contaminated clothing immediately. Wash off immediately with soap and plenty
of water.
Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Keep eye wide open while rinsing.
Ingestion: Never give anything by mouth to an unconscious person. Do not induce vomiting. Call a
physician immediately.
5. FIRE-FIGHTING MEASURES:
Suitable extinguishing media: dry powder, foam, carbon dioxide (CO2)
Extinguishing media which must not be used for safety reasons: water
Fire will produce dense black smoke containing hazardous combustion products (see heading 10). In the
event of fire, wear self-contained breathing apparatus. In the event of fire, cool tanks with water
spray.


-- SAFETY DATA SHEET -- Ref. 000006711/N/AUS
Page 2 of 4
DuPont Performance Coatings Print date 2001-12-28
Revision date: 1999-12-16
Chemical nature of the preparation: 761R , 762R , 763R POLYESTER HARDENER
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Ensure adequate ventilation. wear personal protective equipment Remove all
sources of ignition.
Environmental precautions: Do not let product enter drains.
Methods for cleaning up: Soak up with inert absorbent material. Clean with detergents. Avoid solvents.
7. HANDLING AND STORAGE:
Handling: Technical measures/Precautions: The product should only be used in areas from which all
naked lights and other sources of ignition have been excluded. Electrical equipment
should be protected to the appropriate standard.
Safe handling advice: Do not smoke.
Storage: Technical measures/Storage conditions: Keep at temperatures below 20 °C. Keep away from
sources of ignition - No smoking. Keep containers tightly closed in a cool,
well-ventilated place. Keep away from combustible material., reducing agents, acids.
Incompatible products: Not applicable
Packaging material: Not applicable
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures: Provide adequate ventilation. Where reasonably practicable this should be
achieved by the use of local exhaust ventilation and good general extraction. If these
are not sufficient to maintain concentrations of particulates and solvent vapour below
the OEL, suitable respiratory protection must be worn.
Personal protective equipment:
Respiratory protection: When workers are facing concentrations above the exposure limit they must
use appropriate certified respirators.
Eye protection: safety glasses
Hand protection: solvent-resistant gloves
Skin and body protection: Remove and wash contaminated clothing and gloves, including the inside,
before re-use. flame retardant antistatic protective clothing
Hygiene measures: Keep away from food, drink and animal feeding stuffs. Wash hands before breaks and at
the end of workday.
Exposure controls:
National occupational exposure limits
Worksafe TWA: None established for the formulated product.
benzoyl peroxide: Worksafe TWA = 5 mg/m3; (1995)
diisobutyl phthalate: -


-- SAFETY DATA SHEET -- Ref. 000006711/N/AUS
Page 3 of 4
DuPont Performance Coatings Print date 2001-12-28
Revision date: 1999-12-16
Chemical nature of the preparation: 761R , 762R , 763R POLYESTER HARDENER
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Form: paste
Colour: red
Odour: none
Melting point/range: 103-105 °C
pH: ( °C) Not applicable
Flash point: Not applicable
Autoignition temperature: 80 °C ( benzoyl peroxide )
Decomposition temperature: above 50 °C
Relative density: ( °C) from 0,98 kg/l
to 1,02 kg/l
Solubility:
- water solubility ( °C) immiscible g/l
Viscosity: ( °C) no data available s
10. STABILITY AND REACTIVITY:
Conditions to avoid: No decomposition if stored and applied as directed.
Keep away from combustible material., reducing agents, acids.
Hazardous decomposition products: carbon dioxide, carbon monoxide, smoke, benzoic acid, benzene,
biphenyls
11. TOXICOLOGICAL INFORMATION
Acute toxicity: No data is available on the product itself.
Local effects: No data is available on the product itself.
12. ECOLOGICAL INFORMATION
Ecotoxicity effects: No data is available on the product itself.
13. DISPOSAL CONSIDERATIONS
Waste from residues: Classified as hazardous waste. Dispose of as special waste in compliance with
applicable regulations Do not allow material to contaminate ground water system.
Contaminated packaging: Classified as hazardous waste. Dispose of as special waste in compliance with
applicable regulations Fully drained containers which are drop- and scrape-free can be
treated as industrial waste, and can possibly be recycled.


-- SAFETY DATA SHEET -- Ref. 000006711/N/AUS
Page 4 of 4
DuPont Performance Coatings Print date 2001-12-28
Revision date: 1999-12-16
Chemical nature of the preparation: 761R , 762R , 763R POLYESTER HARDENER
14. TRANSPORT INFORMATION UN-No: 3108
ADR/RID
EPG 2W
Haz Chem 5Q1
Class: 5.2 Item: 8(B) Hazard labels: 5.2
TREM-CARD: 52G01A HI/UN No:
Proper shipping name: 3108 Organic peroxide type E, solid, 5.2, 8(B), ADR
ICAO
UN/ID No.: 3108 Class: 5.2 Subrisks:
Packing group: II Hazard labels: Organic peroxide
Proper shipping name: Organic peroxide type E, solid
IMO
Class: 5.2 IMDG Page: 5228 Subrisks:
Packing group: II Hazard labels: Organic peroxide
EmS: 5.2-01 MFAG: 735
Proper shipping name: Organic peroxide type E, solid
15. REGULATORY INFORMATION
The product is classified and labelled in accordance with Worksafe Australia Hazardous Substances
Regulations.
Symbol(s): Xi - Irritant, O - Oxidizing
Contents: benzoyl peroxide
R-phrase(s): R8 - Contact with combustible material may cause fire.
R36 - Irritating to eyes.
R43 - May cause sensitization by skin contact.
S-phrase(s): S16 - Keep away from sources of ignition - No smoking.
S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
16. OTHER INFORMATION
When used in a mixture, read the labels and safety data sheets of all components.
Recommended use: Car paint for professional use only.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and
belief at the date of its publication. The information given is designed only as a guidance for safe
handling, use, processing, storage, transportation, disposal and release and is not to be considered a
warranty or quality specification. The information relates only to the specific material designated and may
not be valid for such material used in combination with any other materials or in any process, unless
specified in the text.

Source: http://www.resene.com.au/automotive/DuPont_SDS/Polyester_Hardener_SDS.pdf

Ds_centrale_2009_27 avril 2012

Remarques • Les différentes parties du problème sont indépendantes ;• Lors de l’écriture de mécanismes, il n’est pas nécessaire d’écrire les molécules dans leurintégralité ; seul le fragment utile pour expliquer la réaction sera représenté. Lorsqu’on vousdemande d’identifier une structure, il faudra par contre la dessiner complètement ;• Toute réponse doit ê

Copyright © 2010 Medicament Inoculation Pdf